Short Lead Time for Seamless Carbon Steel Tube - Stainless Steel Sheet and Coil – Type 304 Product – Sihe
Short Lead Time for Seamless Carbon Steel Tube - Stainless Steel Sheet and Coil – Type 304 Product – Sihe Detail:
Stainless Steel Sheet and Coil – Type 304 Product
Stainless steel sheet & plate is often referred to as corrosion-resistant steel since it does not stain, corrode or rust as easily as regular carbon steel. Stainless steel sheet & plate is the perfect is the perfect solution for applications that require the metal to have anti-oxidation qualities.
Grade Summary: Excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important. Non magnetic in the annealed condition. Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical. Grade 304L (L= low carbon) is the same as the above except it has an extra-low-carbon analysis, the advantage of which is that it precludes any harmful precipitation in the 800º F to 1500º F range, such as might otherwise occur in welding heavier sections.
Typical Applications: Dairy, beverage and food product handling/processing equipment. Used for handling acetic, nitric, and citric acids; organic and inorganic chemicals, dye stuff, crude and refined oils; instruments; hospital equipment; applications requiring welding.
Typical Chemical Analysis: * C – .08 Max. *Mn – 2.00 Max. *P – .04 Max. *S – .03 Max. *Si – 1.0 Max. *Cr – 18.00/20.00 *Ni – 8.00/10.50 *Cu – .75 Max. *Mo – .75 Max.
Product Line Description
Cold Rolled, Annealed No. 2B Finish
·Can also be furnished:
No. 3 Finish – Polished One or Two Sides
No. 4 Finish – Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)
·Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A240/A480 ASME SA-240
A.S.T.M. A262 Prac E
Applications:
- Rapid transit cars, buses, aircraft, cargo containers
- Retractor springs
- Hose clamps
- Conveyors
- Bottling machinery
- Jewelry
- Cryogenic vessels and components
- Still tubes
- Expand metal parts
- Mixing bowls
- Dryers
- Furnace parts
- Heat exchangers
- Paper mill equipment
- Oil refining equipment
- Textile industry
- Dyeing equipment
- Jet engine parts
- Welded storage tanks for organic chemicals
- Combustion chambers
- Furnace arch supports
- Kiln linings
- Smoke control ductwork
- Coal chutes
- Gauge parts
- Cutlery
- Fish hooks
- Glass molds
- Bank vaults
- Fasteners
- Skewers
- Dairy industry
- Burner and emission control components
- Recuperators
- Pipes, tubes
Stainless Steel Sheet & Plate Applications
Stainless steel sheet & plate have a variety of industrial applications, some of which include:
l Food Processing & Handling
l Heat Exchangers
l Chemical Process Vessels
l Conveyors
Features
1 commodity stainless steel sheet/Plate
2 material 201, 202, 304, 304L, 316, 316L, 309S, 310S, 317L, 321, 409, 409L, 410, 420, 430, etc
3 surface 2B, BA, HL, 4K, 6K, 8KNO. 1, NO. 2, NO. 3, NO. 4, NO. 5, and so on
4 standard AISI, ASTM, DIN, EN, GB, JIS, etc
5 specification
(1) thickness: 0.3mm- 100mm
(2) width: 1000mm, 1250mm, 1500mm, 1800mm, 2000mm, etc
(3) length: 2000mm2440mm, 3000mm, 6000mm, etc
(4) The specifications can be provided as clients’ requirement.
6 application
(1) Construction, decoration
(2) petroleum, chemical industry
(3) electrical appliances, automotive, aerospace
(4) house ware, kitchen appliances, cutlery, foodstuff
(5) surgical instrument
7 advantage
(1) High surface quality, clean, smooth finish
(2) Good corrosion resistance, durability than ordinary steel
(3) High strength and to deform
(4) Not easy to be oxidized
(5) Good welding performance
(6) The use of diversity
8 package
(1) Products are packed and labeled according to regulation
(2) According to customers’ requirement
9 delivery within 20 working days since we get the deposit,mainly according to your quantity and the ways of transportation.
10 payment T/T, L/C
11 shipment FOB/CIF/CFR
12 productivity 500tons/month
13 Note We can supply other grade products as customers’ requirement.
Standard & Material
1 ASTM A240 Standard
201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L
2 ASTM A480 Standard
302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974
3 JIS 4304-2005 Standard SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630
4 JIS G4305 Standard
SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A
Surface treatment
|
Itme |
Surface finishing |
Surface finishing methods |
Main application |
| NO.1 | HR | Heat treatment after hot rolling, pickling, or with treatment | For without the purpose of the surface gloss |
| NO.2D | Without the SPM | Method of heat treatment after cold rolling, pickling surface roller with wool or eventually a light rolling a matte surface processing | General materials,building materials. |
| NO.2B | After SPM | Giving No.2 processing materials appropriate method of cold light sheen | General materials, building materials ( most of the goods are processed ) |
| BA | Bright annealed | Bright heat treatment after cold rolling , in order to be more shiny, cold light effect | Automotive parts, home appliances, vehicles, medical equipment, food equipment |
| NO.3 | Shiny, coarse grain processing | The NO.2D or NO.2B processing timber No. 100-120 polishing abrasive grinding belt | Building materials, kitchen supplies |
| NO.4 | After CPL | The NO.2D or NO.2B processing timber No. 150-180 polishing abrasive grinding belt | Building materials, kitchen supplies, vehicles, medical equipment, food equipment |
| 240# | Grinding of fine lines | The NO.2D or NO.2B processing timber 240 polishing abrasive grinding belt | Kitchen appliances |
| 320# | More than 240 lines of grinding | The NO.2D or NO.2B processing timber 320 polishing abrasive grinding belt | Kitchen appliances |
| 400# | Close to BA luster | The MO.2B timber 400 polishing wheel polishing method | Building materials, kitchen utensils |
| HL(hair lines) | Polishing line having a long continuous processing | In a suitable size ( usually mostly No. 150-240 grit ) abrasive tape for as long as the hair, having a continuous processing method of polishing line | The most common building materials processing |
| NO.6 | NO.4 processing less than the reflection , the extinction | NO.4 processing material used for polishing Tampico brushing | Building materials, decorative |
| NO.7 | Highly accurate reflectance mirror processing | No. 600 of the rotary buff with a polishing | Building materials, decorative |
| NO.8 | Highest reflectivity mirror finish | Fine particles of abrasive material in order polishing , mirror polishing with a polishing | Building materials, decorative, mirrors |
Product detail pictures:
Related Product Guide:
DVO Sapphire Forks and Topaz Air Shock – Core Bike 2016 | 304 Stainless Steel Capillary Tube
Catalytic molten metals for the direct conversion of methane to hydrogen and separable carbon | Astm A312 Stainless Steel Pipe
Our corporation has been specializing in brand strategy. Customers' gratification is our greatest advertising. We also source OEM company for Short Lead Time for Seamless Carbon Steel Tube - Stainless Steel Sheet and Coil – Type 304 Product – Sihe , The product will supply to all over the world, such as: Bandung, Kenya, Portland, Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.
By Geraldine from Maldives - 2016.07.07 13:00
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Riva from Jamaica - 2015.10.09 19:07
Related products
-
Factory Cheap Good Price Super Duplex Stainless...
High quality Very first,and Shopper Supreme is our guideline to offer the most beneficial company to our clients.Nowadays, we’re hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for Hot sale Factory China AISI 201/202/301/304 Stainless Steel Welded Pipe/Tube/Plate/Coil, We’re always looking forward to forming successful business relationships with new purchasers round the earth. High quality Very first,and Shopper Supre...
-
2017 China New Design 304 Steel Tube - China C...
Our business promises all users of the first-class items and the most satisfying post-sale company. We warmly welcome our regular and new prospects to join us for China Cheap price Sale! Sale! Hot Sale! Stainless Tube For Exhaust Motorcycles / Stainless Steel Coiled Pipe / Stainless Steel Pipe, Together with our endeavours, our products and solutions have won the trust of customers and been very salable both here and overseas. Our business promises all users of the first-class items and the m...
-
Super Purchasing for 316l Stainless Steel Tubin...
That has a sound business enterprise credit history, excellent after-sales assistance and modern production facilities, we now have earned an superb status among our buyers across the whole world for 18 Years Factory China Dn6-300mm Stainless Steel Stripwound Metal Hose, We’re very proud of your fantastic popularity from our prospects for our products’ reputable quality. That has a sound business enterprise credit history, excellent after-sales assistance and modern production fac...
-
Popular Design for Micro Stainless Steel Pipe -...
2205(UNS S31803) stainless steel exchanger pipe Heat exchanger tube in an extensive range of austenitic stainless steels, duplex stainless steels, nickel alloys, titanium and zirconium, suitable for all types of heat exchangers, such as seawater coolers, condensers, evaporators, heaters and reheaters. Heat exchanger Tubes are used in all types of process industries. Characteristic requirements are: bead worked weld, fixed lengths and extensive testing. Our commitment to on-time delivery and ...
-
2017 Good Quality S30408/0cr18ni9 Gb/t1220-92 S...
To regularly increase the management program by virtue of your rule of “sincerely, good faith and quality are the base of business development”, we extensively absorb the essence of associated solutions internationally, and continuously create new solutions to satisfy the demands of customers for Factory best selling Stainless Steel Tube Coil Low Hot Dip Galvanized Scaffolding Steel Pipe/tube, If you’re interested in any of our products and services, make sure you don’...
-
Wholesale Discount Duplex Stainless Steel Pipe ...
JIS SUS202 stainless steel welded tubing for exhaust pipe Specification: Item:stainless steel welded polishing pipe Type:welded Standard:EN,ASTM A269A554,JIS ,DIN Grade:201,202, 304,304L,316,316L,409,430,etc Size:Round pipe:OD 8-219m Square Pipe: OD 10x10mm -150x150mm Rectangle Pipe:10x20mm to 120x180mm Thickness:0.2-4.0mm Pipe surface:180G, 320G, 400G, 500G, 600G,Satin, hairline, 2B,BA, mirror,8K Pipe length:5.8m 6M 11.85M 12m The physical properties of stainless steel polishing pipe: ...
