New Fashion Design for Stainless Steel Slotted Tube For 16mm Glass - Ncoloy 825 (UNS N08825) stainless steel capillary tubings – Sihe
New Fashion Design for Stainless Steel Slotted Tube For 16mm Glass - Ncoloy 825 (UNS N08825) stainless steel capillary tubings – Sihe Detail:
Manufacturing range:
Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to requests
Capillary tubes with a maximum bore of 0.0158 in., available in a wide range of stainless steels. Sandvik capillary tubes are characterized by tight tolerances, and the inside surface of the tubes is free from oil, grease and other particles. This ensures, for example, an optimized and even flow of liquids and gases from the sensor to the measuring instrument.
Stainless steel Coiled tubing is available in a range of different product forms depending on the customer requirements. Licancheng sihe stainless steel material manufactures welded and seamless tube products. The standard grades are 304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) Other grades of stainless steel in duplex and superduplex and nickel alloy are available on request.
Diameter from 3mm (0.118’’) to 25.4mm (1.00’’) OD. Wall thickness from 0.5mm (0.020’’) to 3mm (0.118’’).Tubing can be supplied in the annealed or cold worked stainless steel control line pipe condition.
Specification
- Production standards: ASTM A269/A249, standard
- stainless steel material :304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625)
3. Size range: diameter 3MM(0.118”-25.4(1.0”)MM
4. Wall thicknesses: 0.5mm (0.020’’) to 3mm (0.118’’)
5.General delivery pipe status: half hard / soft bright annealing
6.The tolerance range: diameter: + 0.1mm, wall thickness: + 10%, length: -0/+6mm
7.Annual output: 600 tons
8.Coil lengthsup to: 500MM-13500MM (45000feet)(can be adjusted according to customer requirements)
2. Commonly Size of stainless steel coiled tube: we can product them as your request.
|
Size of Stainless steel Coil Tube |
||||||||||||||||
|
ITEM |
Grade |
Size |
Pressure |
Length |
||||||||||||
|
1 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.025″ |
3200 |
500-35000 |
||||||||||||
|
2 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.035″ |
3200 |
500-35000 |
||||||||||||
|
3 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.035″ |
2000 |
500-35000 |
||||||||||||
|
4 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.049″ |
2000 |
500-35000 |
||||||||||||
|
5 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.035″ |
1500 |
500-35000 |
||||||||||||
|
6 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.049″ |
1500 |
500-35000 |
||||||||||||
|
7 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.049″ |
1000 |
500-35000 |
||||||||||||
|
8 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.065″ |
1000 |
500-35000 |
||||||||||||
|
9 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.7mm |
3200 |
500-35000 |
||||||||||||
|
10 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.9mm |
3200 |
500-35000 |
||||||||||||
|
11 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×0.9mm |
3000 |
500-35000 |
||||||||||||
|
12 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×1.1mm |
3000 |
500-35000 |
||||||||||||
|
13 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×0.9mm |
2000 |
500-35000 |
||||||||||||
|
14 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×1.1mm |
2000 |
500-35000 |
||||||||||||
|
15 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1mm |
1800 |
500-35000 |
||||||||||||
|
16 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1.2mm |
1800 |
500-35000 |
||||||||||||
|
17 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1mm |
1500 |
500-35000 |
||||||||||||
|
18 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1.2mm |
1500 |
500-35000 |
||||||||||||
|
19 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×2mm |
500 |
500-35000 |
||||||||||||
|
20 |
316L、304L、304 alloy 625 825 2205 2507 |
φ12mm×1.5mm |
500 |
500-35000 |
||||||||||||
| Pressure tables | ||||||||||||||||
| Selection of the appropriate material for any given control or chemical injection line is subject to the prevailing operational and site conditions. In order to assist in the selection, the following tables provide internal pressure ratings and the adjustments factors for a range of common grades and sizes of seamless and laser welded stainless tubing. | ||||||||||||||||
| Maximum pressure (P) for TP 316L at 100°F (38°C)1) | ||||||||||||||||
| Please refer to grade and product form adjustment factors below. | ||||||||||||||||
| Outside diameter, in. | Wall thickness, in. | Working pressure2) | Burst pressure2) | Collapse pressure4) | ||||||||||||
| psi (MPa) | psi (MPa) | psi (MPa) | ||||||||||||||
| 1/4 | 0.035 | 6,600 (46) | 22,470 (155) | 6,600 (46) | ||||||||||||
| 1/4 | 0.049 | 9,260 (64) | 27,400 (189) | 8,710 (60) | ||||||||||||
| 1/4 | 0.065 | 12,280 (85) | 34,640 (239) | 10,750 (74) | ||||||||||||
| 3/8 | 0.035 | 4,410 (30) | 19,160 (132) | 4,610 (32) | ||||||||||||
| 3/8 | 0.049 | 6,170 (43) | 21,750 (150) | 6,220 (43) | ||||||||||||
| 3/8 | 0.065 | 8,190 (56) | 25,260 (174) | 7,900 (54) | ||||||||||||
| 3/8 | 0.083 | 10,450 (72) | 30,050 (207) | 9,570 (66) | ||||||||||||
| 1/2 | 0.049 | 4,630 (32) | 19,460 (134) | 4,820 (33) | ||||||||||||
| 1/2 | 0.065 | 6,140 (42) | 21,700 (150) | 6,200 (43) | ||||||||||||
| 1/2 | 0.083 | 7,840 (54) | 24,600 (170) | 7,620 (53) | ||||||||||||
| 5/8 | 0.049 | 3,700 (26) | 18,230 (126) | 3,930 (27) | ||||||||||||
| 5/8 | 0.065 | 4,900 (34) | 19,860 (137) | 5,090 (35) | ||||||||||||
| 5/8 | 0.083 | 6,270 (43) | 26,910 (151) | 6,310 (44) | ||||||||||||
| 3/4 | 0.049 | 3,080 (21) | 17,470 (120) | 3,320 (23) | ||||||||||||
| 3/4 | 0.065 | 4,090 (28) | 18,740 (129) | 4,310 (30) | ||||||||||||
| 3/4 | 0.083 | 5,220 (36) | 20,310 (140) | 5,380 (37) | ||||||||||||
| 1) Estimates only. Actual pressures should be calculated considering all stress factors in the system. | ||||||||||||||||
| 2) Based on calculations from API 5C3, using a wall tolerance of +/-10% | ||||||||||||||||
| 3) Based on ultimate strength burst calculations from API 5C3 | ||||||||||||||||
| 4) Based on yield strength collapse calculations from API 5C3 | ||||||||||||||||
| Adjustment factors for working pressure limits1) | ||||||||||||||||
| Pw = reference working pressure rating for TP 316L at 100°F (38°C). To determine working pressure for grade/temperature combination, multiply Pw by adjustment factor. | ||||||||||||||||
| Grade | 100°F | 200°F | 300°F | 400°F | ||||||||||||
| (38°C) | (93°C) | (149°C) | (204°C) | |||||||||||||
| TP 316L, seamless | 1 | 0.87 | 0.7 | 0.63 | ||||||||||||
| TP 316L, welded | 0.85 | 0.74 | 0.6 | 0.54 | ||||||||||||
| Alloy 825, seamless | 1.33 | 1.17 | 1.1 | 1.03 | ||||||||||||
| Alloy 825, welded | 1.13 | 1.99 | 1.94 | 0.88 | ||||||||||||
| 1) Adjustment factors based on allowable stress in ASME. | ||||||||||||||||
| Adjustment factors for burst pressure limits1) | ||||||||||||||||
| Pb = reference burst pressure for TP 316L at 100°F. To determine burst pressure for grade/temperature combination, multiply Pb by adjustment factor. | ||||||||||||||||
| Grade | 100°F | 200°F | 300°F | 400°F | ||||||||||||
| (38°C) | (93°C) | (149°C) | (204°C) | |||||||||||||
| TP 316L, seamless | 1 | 0.93 | 0.87 | 0.8 | ||||||||||||
| TP 316L, welded | 0.85 | 0.79 | 0.74 | 0.68 | ||||||||||||
| Alloy 825, seamless | 1.13 | 1.07 | 1 | 0.87 | ||||||||||||
| Alloy 825, welded | 0.96 | 0.91 | 0.85 | 0.74 | ||||||||||||
|
1) Adjustment factors based on ultimate strength in ASME. |
||||||||||||||||
Chemical composition:
|
316 Stainless steel capillary tube |
|||||||||
| Grade | UNS | C | Cr | Ni | Mo | Others | |||
| max. | |||||||||
|
TP 316L |
S31600/ S31603 |
0.03 |
17.5 |
13 |
2.1 |
0.1 |
|||
| Mechanical properties | |||||||||
| Grade |
Yield strength, |
Tensile strength, |
Elongation |
||||||
|
psi (MPa) |
psi (MPa) |
% |
|||||||
| TP 316L |
32,000 (220) |
75,000 (515) |
35 |
||||||
| Corrosion properties | |||||||||
|
Grade |
UNS |
PRE1) |
CPT2) F (oC) |
Max H2S3) |
CO24) |
||||
|
TP 316L |
S31600/S31603 |
24 |
95 (35) |
No limit |
+ |
||||
Quality advantage:
The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:
1.Non-destructive tests
2. Hydrostatic tests
3.Surface finish controls
4. Dimensional accuracy measurements
5.Flare and coning tests
6. Mechanical and chemical property testing
Stainless steel coil tube Application:
- refrigeration equipment
- evaporator,
- gas liquid delivery
- Condenser
- beverage machine.
Product detail pictures:
Related Product Guide:
Nanoengineers 3-D print lifelike, functional blood vessel network that could pave the way toward artificial organs | Astm A312 Stainless Steel Pipe
Protein alterations in women with chronic widespread pain | 34mm Seamless Steel Pipe Tube
With advanced technologies and facilities, strict high-quality handle, reasonable rate, superior services and close co-operation with prospects, we are devoted to furnishing the best price for our customers for New Fashion Design for Stainless Steel Slotted Tube For 16mm Glass - Ncoloy 825 (UNS N08825) stainless steel capillary tubings – Sihe , The product will supply to all over the world, such as: Malaysia, Pretoria, Washington, Based on experienced engineers, all orders for drawing-based or sample-based processing are welcomed. We have won a good reputation for outstanding customer service among our overseas customers. We will continue to try the best to offer you good quality products and the best service. We are looking forward to serving you.
By Lindsay from Russia - 2015.09.29 13:24
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Alma from New York - 2015.06.09 12:42
Related products
-
OEM/ODM Factory Tube Stainless Steel Price - F...
We have a professional, efficiency team to provide quality service for our customer. We always follow the tenet of customer-oriented, details-focused for Factory Selling 316 321 Low Hot Sale Stainless Steel Coil Tube, Our clientele mainly distributed within the North America, Africa and Eastern Europe. we are able to supply premium quality goods with the incredibly aggressive price tag. We have a professional, efficiency team to provide quality service for our customer. We always follow the t...
-
Newly Arrival 316l Stainless Steel Coil Tubing ...
ASTM A312 stainless steel 316 exchanger pipe stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube suppliers stainless steel coil tube manufacturers stainless steel pipe coil Heat exchanger tube in an extensive range of austenitic stainless steels, duplex stainless steels, nickel alloys, titanium and zirconium, suitable for all types of heat exchangers, such as seawater coolers, condensers, evaporators, heaters and ...
-
OEM China Astm A269 316 Stainless Steel Coil Tu...
For being the stage of realizing dreams of our employees! To build a happier, much more united and much more expert staff! To reach a mutual gain of our prospects, suppliers, the society and ourselves for 2019 High quality China ASTM A312 Stainless Steel Tube with 304 304L 316L 321 310S, The continual availability of substantial grade products and solutions in combination with our fantastic pre- and after-sales services ensures strong competitiveness in an increasingly globalized current mark...
-
China Supplier Cold Rolled Grade 316l 201 2b 30...
To frequently enhance the administration program by virtue on the rule of “sincerely, very good faith and high-quality are the base of enterprise development”, we widely absorb the essence of related products internationally, and consistently develop new products to fulfill the calls for of customers for 18 Years Factory Prime Tisco 201 202 304 304l 316 316l 430 310s Stainless Steel Coil, We warmly welcome all intrigued customers to speak to us for additional information and facts...
-
100% Original Tp321 Stainless Steel Pipe - Top...
In the past few years, our firm absorbed and digested highly developed technologies equally at home and abroad. Meanwhile, our business staffs a group of experts devoted on the growth of Top Grade 316l Stainless Steel Welded Coiled Tubes/tubing/pipe, We now have been in operation for more than 10 years. We are dedicated to high quality products and solutions and consumer assistance. We invite you to definitely stop by our business for a personalized tour and advanced company guidance. In the ...
-
High reputation Stainless Steel Pipe Astm A213 ...
ASTM A312 stainless steel 304 exchanger pipe Heat exchanger tube in an extensive range of austenitic stainless steels, duplex stainless steels, nickel alloys, titanium and zirconium, suitable for all types of heat exchangers, such as seawater coolers, condensers, evaporators, heaters and reheaters. Heat exchanger Tubes are used in all types of process industries. Characteristic requirements are: bead worked weld, fixed lengths and extensive testing. Our commitment to on-time delivery and supp...
