Factory Supply 1 Inch Stainless Steel Pipe - Stainless Steel Sheet and Coil – Type 304 Product – Sihe
Factory Supply 1 Inch Stainless Steel Pipe - Stainless Steel Sheet and Coil – Type 304 Product – Sihe Detail:
Stainless Steel Sheet and Coil – Type 304 Product
Stainless steel sheet & plate is often referred to as corrosion-resistant steel since it does not stain, corrode or rust as easily as regular carbon steel. Stainless steel sheet & plate is the perfect is the perfect solution for applications that require the metal to have anti-oxidation qualities.
Grade Summary: Excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important. Non magnetic in the annealed condition. Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical. Grade 304L (L= low carbon) is the same as the above except it has an extra-low-carbon analysis, the advantage of which is that it precludes any harmful precipitation in the 800º F to 1500º F range, such as might otherwise occur in welding heavier sections.
Typical Applications: Dairy, beverage and food product handling/processing equipment. Used for handling acetic, nitric, and citric acids; organic and inorganic chemicals, dye stuff, crude and refined oils; instruments; hospital equipment; applications requiring welding.
Typical Chemical Analysis: * C – .08 Max. *Mn – 2.00 Max. *P – .04 Max. *S – .03 Max. *Si – 1.0 Max. *Cr – 18.00/20.00 *Ni – 8.00/10.50 *Cu – .75 Max. *Mo – .75 Max.
Product Line Description
Cold Rolled, Annealed No. 2B Finish
·Can also be furnished:
No. 3 Finish – Polished One or Two Sides
No. 4 Finish – Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)
·Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A240/A480 ASME SA-240
A.S.T.M. A262 Prac E
Applications:
- Rapid transit cars, buses, aircraft, cargo containers
- Retractor springs
- Hose clamps
- Conveyors
- Bottling machinery
- Jewelry
- Cryogenic vessels and components
- Still tubes
- Expand metal parts
- Mixing bowls
- Dryers
- Furnace parts
- Heat exchangers
- Paper mill equipment
- Oil refining equipment
- Textile industry
- Dyeing equipment
- Jet engine parts
- Welded storage tanks for organic chemicals
- Combustion chambers
- Furnace arch supports
- Kiln linings
- Smoke control ductwork
- Coal chutes
- Gauge parts
- Cutlery
- Fish hooks
- Glass molds
- Bank vaults
- Fasteners
- Skewers
- Dairy industry
- Burner and emission control components
- Recuperators
- Pipes, tubes
Stainless Steel Sheet & Plate Applications
Stainless steel sheet & plate have a variety of industrial applications, some of which include:
l Food Processing & Handling
l Heat Exchangers
l Chemical Process Vessels
l Conveyors
Features
1 commodity stainless steel sheet/Plate
2 material 201, 202, 304, 304L, 316, 316L, 309S, 310S, 317L, 321, 409, 409L, 410, 420, 430, etc
3 surface 2B, BA, HL, 4K, 6K, 8KNO. 1, NO. 2, NO. 3, NO. 4, NO. 5, and so on
4 standard AISI, ASTM, DIN, EN, GB, JIS, etc
5 specification
(1) thickness: 0.3mm- 100mm
(2) width: 1000mm, 1250mm, 1500mm, 1800mm, 2000mm, etc
(3) length: 2000mm2440mm, 3000mm, 6000mm, etc
(4) The specifications can be provided as clients’ requirement.
6 application
(1) Construction, decoration
(2) petroleum, chemical industry
(3) electrical appliances, automotive, aerospace
(4) house ware, kitchen appliances, cutlery, foodstuff
(5) surgical instrument
7 advantage
(1) High surface quality, clean, smooth finish
(2) Good corrosion resistance, durability than ordinary steel
(3) High strength and to deform
(4) Not easy to be oxidized
(5) Good welding performance
(6) The use of diversity
8 package
(1) Products are packed and labeled according to regulation
(2) According to customers’ requirement
9 delivery within 20 working days since we get the deposit,mainly according to your quantity and the ways of transportation.
10 payment T/T, L/C
11 shipment FOB/CIF/CFR
12 productivity 500tons/month
13 Note We can supply other grade products as customers’ requirement.
Standard & Material
1 ASTM A240 Standard
201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L
2 ASTM A480 Standard
302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974
3 JIS 4304-2005 Standard SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630
4 JIS G4305 Standard
SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A
Surface treatment
|
Itme |
Surface finishing |
Surface finishing methods |
Main application |
| NO.1 | HR | Heat treatment after hot rolling, pickling, or with treatment | For without the purpose of the surface gloss |
| NO.2D | Without the SPM | Method of heat treatment after cold rolling, pickling surface roller with wool or eventually a light rolling a matte surface processing | General materials,building materials. |
| NO.2B | After SPM | Giving No.2 processing materials appropriate method of cold light sheen | General materials, building materials ( most of the goods are processed ) |
| BA | Bright annealed | Bright heat treatment after cold rolling , in order to be more shiny, cold light effect | Automotive parts, home appliances, vehicles, medical equipment, food equipment |
| NO.3 | Shiny, coarse grain processing | The NO.2D or NO.2B processing timber No. 100-120 polishing abrasive grinding belt | Building materials, kitchen supplies |
| NO.4 | After CPL | The NO.2D or NO.2B processing timber No. 150-180 polishing abrasive grinding belt | Building materials, kitchen supplies, vehicles, medical equipment, food equipment |
| 240# | Grinding of fine lines | The NO.2D or NO.2B processing timber 240 polishing abrasive grinding belt | Kitchen appliances |
| 320# | More than 240 lines of grinding | The NO.2D or NO.2B processing timber 320 polishing abrasive grinding belt | Kitchen appliances |
| 400# | Close to BA luster | The MO.2B timber 400 polishing wheel polishing method | Building materials, kitchen utensils |
| HL(hair lines) | Polishing line having a long continuous processing | In a suitable size ( usually mostly No. 150-240 grit ) abrasive tape for as long as the hair, having a continuous processing method of polishing line | The most common building materials processing |
| NO.6 | NO.4 processing less than the reflection , the extinction | NO.4 processing material used for polishing Tampico brushing | Building materials, decorative |
| NO.7 | Highly accurate reflectance mirror processing | No. 600 of the rotary buff with a polishing | Building materials, decorative |
| NO.8 | Highest reflectivity mirror finish | Fine particles of abrasive material in order polishing , mirror polishing with a polishing | Building materials, decorative, mirrors |
Product detail pictures:
Related Product Guide:
Suzuki Introduces New Street, Cruiser, Dual Sport And Scooter Models | Stainless Steel Pipe 304
Harley-Davidson Announces New Low Rider And SuperLow 1200T Models | 304l Stainless Steel Capillary Tube
Our solutions are widely regarded and trustworthy by consumers and may meet continually modifying financial and social requirements for Factory Supply 1 Inch Stainless Steel Pipe - Stainless Steel Sheet and Coil – Type 304 Product – Sihe , The product will supply to all over the world, such as: Saudi Arabia, Finland, Egypt, We've a good reputation for stable quality solutions, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with customers both at home and abroad. We expect sincere cooperation and common development!
By Kama from Los Angeles - 2016.12.09 14:01
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
By Salome from Thailand - 2015.11.22 12:28
Related products
-
Cheap PriceList for Surface Roughness Steel Pip...
ASTM A312 Stainless Steel 304 Welded Pipe ASTM A312 welded pipes Suppliers,Stainless Steel Welded Pipes Manufacturer,Stainless Steel ERW Pipes Stockholder,SS ERW Pipes Exporter In China. ERW Pipes are being found in widespread range of applications such as in Petrochemical, Chemical, oil & Gas, Refinery, Fertilizer, Automotive, Bearing, Power, Structural Mechanical applications. We provide these welded pipes in different grades, thickness and sizes as per tailored needs given by our custo...
-
Cheap PriceList for Tp304/316 Stainless Steel C...
Liaocheng sihe stainless steel material limited company is a manufacturer for stainless steel coiled tube ,produces stainless steel coiled tubing including Inconel 625 Tubing are the High Performance Alloy tubing. Alloy 625 Tubing is a material with excellent resistance to pitting, crevice and corrosion cracking. Nickel 625 tubing is highly resistant in a wide range of organic and mineral acids. Good high temperature strength. These tubing are High resistance to oxidation at elevated temperat...
-
2017 Good Quality Low Price Stainless Steel Ss3...
ASTM A269 alloy 310s stainless steel coil tubing suppliers Specification: stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube suppliers stainless steel coil tube manufacturers stainless steel pipe coil alloy 310s stainless steel : Introduction Stainless steels are known as high-alloy steels. They are classified into ferritic, austenitic, and martensitic steels based on their crystalline structure. Grade 310S stain...
-
Hot sale low Price Stainless Steel Ss304l Pipe...
We have been ready to share our knowledge of internet marketing worldwide and recommend you suitable items at most aggressive selling prices. So Profi Tools give you ideal benefit of money and we have been ready to create with each other with China Gold Supplier for Stainless Steel Decorative Cooling Coil Tube, With the development of society and economy, our company will keep a tenet of “Focus on trust, quality the first”, moreover, we expect to create a glorious future with ever...
-
Cheapest Factory Small Diameter Stainless Steel...
Introduction 904L is a non-stabilised low carbon high alloy austenitic stainless steel. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids, particularly sulphuric acid. It is also highly resistant to chloride attack – both pitting / crevice corrosion and stress corrosion cracking. This grade is non-magnetic in all conditions and has excellent weldability and formability. The austenitic structure also gives this grade excellent toughness, e...
-
Europe style for Seamless / Welded Aisi304 Stai...
316L stainless steel welded pipe Stainless Steel coil products： stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube suppliers stainless steel coil tube manufacturers stainless steel pipe coil Specification: Item:stainless steel welded polishing pipe Type:welded Standard:ASTM A554 JIS ,DIN Grade:201,202, 304,304L,316,316L,409,430,etc Size:Round pipe:OD 8-219m Square Pipe: OD 10x10mm -150x150mm Rectangle Pipe:10x2...
