Factory Free sample Erw Welded Stainless Steel Pipe 316l - 316stainless steel capillary tubing – Sihe
Factory Free sample Erw Welded Stainless Steel Pipe 316l - 316stainless steel capillary tubing – Sihe Detail:
Manufacturing range:
Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to requests
Capillary tubes with a maximum bore of 0.0158 in., available in a wide range of stainless steels. Sandvik capillary tubes are characterized by tight tolerances, and the inside surface of the tubes is free from oil, grease and other particles. This ensures, for example, an optimized and even flow of liquids and gases from the sensor to the measuring instrument.
Stainless steel Coiled tubing is available in a range of different product forms depending on the customer requirements. Licancheng sihe stainless steel material manufactures welded and seamless tube products. The standard grades are 304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) Other grades of stainless steel in duplex and superduplex and nickel alloy are available on request.
Diameter from 3mm (0.118’’) to 25.4mm (1.00’’) OD. Wall thickness from 0.5mm (0.020’’) to 3mm (0.118’’).Tubing can be supplied in the annealed or cold worked stainless steel control line pipe condition.
Specification
- Production standards: ASTM A269/A249, standard
- stainless steel material :304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625)
3. Size range: diameter 3MM(0.118”-25.4(1.0”)MM
4. Wall thicknesses: 0.5mm (0.020’’) to 3mm (0.118’’)
5.General delivery pipe status: half hard / soft bright annealing
6.The tolerance range: diameter: + 0.1mm, wall thickness: + 10%, length: -0/+6mm
7.Annual output: 600 tons
8.Coil lengthsup to: 500MM-13500MM (45000feet)(can be adjusted according to customer requirements)
Commonly Size of stainless steel coiled tube: we can product them as your request.
|
Size of Stainless steel Coil Tube |
||||||||||||||||
|
ITEM |
Grade |
Size |
Pressure |
Length |
||||||||||||
|
1 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.025″ |
3200 |
500-35000 |
||||||||||||
|
2 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.035″ |
3200 |
500-35000 |
||||||||||||
|
3 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.035″ |
2000 |
500-35000 |
||||||||||||
|
4 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.049″ |
2000 |
500-35000 |
||||||||||||
|
5 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.035″ |
1500 |
500-35000 |
||||||||||||
|
6 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.049″ |
1500 |
500-35000 |
||||||||||||
|
7 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.049″ |
1000 |
500-35000 |
||||||||||||
|
8 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.065″ |
1000 |
500-35000 |
||||||||||||
|
9 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.7mm |
3200 |
500-35000 |
||||||||||||
|
10 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.9mm |
3200 |
500-35000 |
||||||||||||
|
11 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×0.9mm |
3000 |
500-35000 |
||||||||||||
|
12 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×1.1mm |
3000 |
500-35000 |
||||||||||||
|
13 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×0.9mm |
2000 |
500-35000 |
||||||||||||
|
14 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×1.1mm |
2000 |
500-35000 |
||||||||||||
|
15 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1mm |
1800 |
500-35000 |
||||||||||||
|
16 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1.2mm |
1800 |
500-35000 |
||||||||||||
|
17 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1mm |
1500 |
500-35000 |
||||||||||||
|
18 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1.2mm |
1500 |
500-35000 |
||||||||||||
|
19 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×2mm |
500 |
500-35000 |
||||||||||||
|
20 |
316L、304L、304 alloy 625 825 2205 2507 |
φ12mm×1.5mm |
500 |
500-35000 |
||||||||||||
|
Pressure tables |
||||||||||||||||
|
Selection of the appropriate material for any given control or chemical injection line is subject to the prevailing operational and site conditions. In order to assist in the selection, the following tables provide internal pressure ratings and the adjustments factors for a range of common grades and sizes of seamless and laser welded stainless tubing. |
||||||||||||||||
|
Maximum pressure (P) for TP 316L at 100°F (38°C)1) |
||||||||||||||||
|
Please refer to grade and product form adjustment factors below. |
||||||||||||||||
|
Outside diameter, in. |
Wall thickness, in. |
Working pressure2) |
Burst pressure2) |
Collapse pressure4) |
||||||||||||
|
psi (MPa) |
psi (MPa) |
psi (MPa) |
||||||||||||||
|
1/4 |
0.035 |
6,600 (46) |
22,470 (155) |
6,600 (46) |
||||||||||||
|
1/4 |
0.049 |
9,260 (64) |
27,400 (189) |
8,710 (60) |
||||||||||||
|
1/4 |
0.065 |
12,280 (85) |
34,640 (239) |
10,750 (74) |
||||||||||||
|
3/8 |
0.035 |
4,410 (30) |
19,160 (132) |
4,610 (32) |
||||||||||||
|
3/8 |
0.049 |
6,170 (43) |
21,750 (150) |
6,220 (43) |
||||||||||||
|
3/8 |
0.065 |
8,190 (56) |
25,260 (174) |
7,900 (54) |
||||||||||||
|
3/8 |
0.083 |
10,450 (72) |
30,050 (207) |
9,570 (66) |
||||||||||||
|
1/2 |
0.049 |
4,630 (32) |
19,460 (134) |
4,820 (33) |
||||||||||||
|
1/2 |
0.065 |
6,140 (42) |
21,700 (150) |
6,200 (43) |
||||||||||||
|
1/2 |
0.083 |
7,840 (54) |
24,600 (170) |
7,620 (53) |
||||||||||||
|
5/8 |
0.049 |
3,700 (26) |
18,230 (126) |
3,930 (27) |
||||||||||||
|
5/8 |
0.065 |
4,900 (34) |
19,860 (137) |
5,090 (35) |
||||||||||||
|
5/8 |
0.083 |
6,270 (43) |
26,910 (151) |
6,310 (44) |
||||||||||||
|
3/4 |
0.049 |
3,080 (21) |
17,470 (120) |
3,320 (23) |
||||||||||||
|
3/4 |
0.065 |
4,090 (28) |
18,740 (129) |
4,310 (30) |
||||||||||||
|
3/4 |
0.083 |
5,220 (36) |
20,310 (140) |
5,380 (37) |
||||||||||||
|
1) Estimates only. Actual pressures should be calculated considering all stress factors in the system. |
||||||||||||||||
|
2) Based on calculations from API 5C3, using a wall tolerance of +/-10% |
||||||||||||||||
|
3) Based on ultimate strength burst calculations from API 5C3 |
||||||||||||||||
|
4) Based on yield strength collapse calculations from API 5C3 |
||||||||||||||||
|
Adjustment factors for working pressure limits1) |
||||||||||||||||
|
Pw = reference working pressure rating for TP 316L at 100°F (38°C). To determine working pressure for grade/temperature combination, multiply Pw by adjustment factor. |
||||||||||||||||
|
Grade |
100°F |
200°F |
300°F |
400°F |
||||||||||||
|
(38°C) |
(93°C) |
(149°C) |
(204°C) |
|||||||||||||
|
TP 316L, seamless |
1 |
0.87 |
0.7 |
0.63 |
||||||||||||
|
TP 316L, welded |
0.85 |
0.74 |
0.6 |
0.54 |
||||||||||||
|
Alloy 825, seamless |
1.33 |
1.17 |
1.1 |
1.03 |
||||||||||||
|
Alloy 825, welded |
1.13 |
1.99 |
1.94 |
0.88 |
||||||||||||
|
1) Adjustment factors based on allowable stress in ASME. |
||||||||||||||||
|
Adjustment factors for burst pressure limits1) |
||||||||||||||||
|
Pb = reference burst pressure for TP 316L at 100°F. To determine burst pressure for grade/temperature combination, multiply Pb by adjustment factor. |
||||||||||||||||
|
Grade |
100°F |
200°F |
300°F |
400°F |
||||||||||||
|
(38°C) |
(93°C) |
(149°C) |
(204°C) |
|||||||||||||
|
TP 316L, seamless |
1 |
0.93 |
0.87 |
0.8 |
||||||||||||
|
TP 316L, welded |
0.85 |
0.79 |
0.74 |
0.68 |
||||||||||||
|
Alloy 825, seamless |
1.13 |
1.07 |
1 |
0.87 |
||||||||||||
|
Alloy 825, welded |
0.96 |
0.91 |
0.85 |
0.74 |
||||||||||||
|
1) Adjustment factors based on ultimate strength in ASME. |
||||||||||||||||
Chemical composition:
|
316 Stainless steel capillary tube |
|||||||||
| Grade | UNS | C | Cr | Ni | Mo | Others | |||
| max. | |||||||||
|
TP 316L |
S31600/ S31603 |
0.03 |
17.5 |
13 |
2.1 |
0.1 |
|||
| Mechanical properties | |||||||||
| Grade |
Yield strength, |
Tensile strength, |
Elongation |
||||||
|
psi (MPa) |
psi (MPa) |
% |
|||||||
| TP 316L |
32,000 (220) |
75,000 (515) |
35 |
||||||
| Corrosion properties | |||||||||
|
Grade |
UNS |
PRE1) |
CPT2) F (oC) |
Max H2S3) |
CO24) |
||||
|
TP 316L |
S31600/S31603 |
24 |
95 (35) |
No limit |
+ |
||||
Quality advantage:
The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:
1.Non-destructive tests
2. Hydrostatic tests
3.Surface finish controls
4. Dimensional accuracy measurements
5.Flare and coning tests
6. Mechanical and chemical property testing
Stainless steel coil tube Application:
- refrigeration equipment
- evaporator,
- gas liquid delivery
- Condenser
- beverage machine.
Product detail pictures:
Related Product Guide:
Microbiologically Influenced Corrosion of 2707 Hyper-Duplex Stainless Steel by Marine Pseudomonas aeruginosa Biofilm | 34mm Seamless Steel Pipe Tube
A sponge-like molecular cage for purification of fullerenes | Astm A312 Stainless Steel Pipe
Our rewards are reduce selling prices,dynamic revenue team,specialized QC,sturdy factories,superior quality services for Factory Free sample Erw Welded Stainless Steel Pipe 316l - 316stainless steel capillary tubing – Sihe , The product will supply to all over the world, such as: Niger, British, Ukraine, Our products have mainly exported to south-east Asia Euro-America, and sales to all of our country. And depending on excellent quality, reasonable price, best service, we have got good feedback from customers overseas. You are welcomed to join us for more possibilities and benefits. We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
By Ryan from Leicester - 2016.04.18 16:45
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Bernice from Chile - 2015.08.12 12:27
Related products
-
Good Quality 316l Stainless Steel - factory Ou...
Our well-equipped facilities and exceptional good quality manage throughout all stages of production enables us to guarantee total shopper satisfaction for factory Outlets for Stainless Steel Coil Tube For Efficiency Gas Lines, We generally hold the philosophy of win-win, and build long-term cooperation partnership with clients from throughout the earth.We believe that our growth base on customer’s achievements, credit history is our lifetime. Our well-equipped facilities and exceptiona...
-
Factory Price 18 Inch Welded Stainless Steel Pi...
ASTM 316L stainless steel welded pipe Specification: Item:stainless steel welded polishing pipe Type:welded Standard:ASTM A554 JIS ,DIN Grade:201,202, 304,304L,316,316L,409,430,etc Size:Round pipe:OD 8-219m Square Pipe: OD 10x10mm -150x150mm Rectangle Pipe:10x20mm to 120x180mm Thickness:0.2-4.0mm Pipe surface:180G, 320G, 400G, 500G, 600G,Satin, hairline, 2B,BA, mirror,8K Pipe length:5.8m 6M 11.85M 12m The physical properties of stainless steel polishing pipe: Grade Composition, ...
-
China Cheap price 202 Grade Stainless Steel Pip...
JIS DIN TP316L Stainless steel Precision pipe Stainless steel pipe is one of the more standardized materials in the building and engineering industries. Stainless Steel Seamless Pipes is a hollow steel bar, a large number of pipes used for conveying fluids, such as oil, gas, water, gas, steam,heat exchanger,mechanical machine. Stainless Steel coil products： stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube supp...
-
Europe style for 310 Capillary Tubings - Profe...
With advanced technologies and facilities, strict high quality regulate, reasonable price tag, excellent support and close co-operation with shoppers, we have been devoted to furnishing the best benefit for our buyers for Professional China Stainless Steel Capillary Coil/Coiled Tubes (tubings, Pipes) Supplier, Our hugely specialized process eliminates the component failure and offers our customers unvarying high quality, allowing us to control cost, plan capacity and maintain consistent on ti...
-
Best Price on Electric Heating Element - Disco...
We intention to see quality disfigurement within the creation and supply the ideal support to domestic and overseas buyers wholeheartedly for Discount Price 316l Rectangle Stainless Steel Pipe/tube, We have ISO 9001 Certification and qualified this product or service .in excess of 16 years experiences in manufacturing and designing, so our goods featured with very best high-quality and aggressive rate. Welcome cooperation with us! We intention to see quality disfigurement within the creation ...
-
High definition Stainless Steel Coil Tube Compa...
ASTM A269 alloy 310s stainless steel coil tubing suppliers Specification: alloy 310s stainless steel stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube suppliers stainless steel coil tube manufacturers stainless steel pipe coil Introduction Stainless steels are known as high-alloy steels. They are classified into ferritic, austenitic, and martensitic steels based on their crystalline structure. Grade 310S stainl...
